Pushbutton Units and Indicator Lights
Pushbutton Units and Indicator Lights
SIRIUS 3SB3
Dimension drawings (mm) COhpoeircaetoorfaenqduinpdmiceanttor elements
...
Description
Pushbutton Units and Indicator Lights
SIRIUS 3SB3
Dimension drawings (mm) COhpoeircaetoorfaenqduinpdmiceanttor elements
Dimension drawings Mounting dimensions
Round design
Square design
Molded-plastic version, round
Pushbutton or illuminated pushbutton with flat pushbutton and single-pole switch block (and lampholder)
Pushbutton or illuminated pushbutton with raised button
Minimum clearance
Switch blocks (1 contact) and lampholder for front plate mounting, with screw terminals for front plate mounting, with spring-loaded terminals for use on PCB, with solder pins
Switch blocks with 2 contacts for front plate mounting
When using holders for labeling plates 12.5 mm × 27 mm 27.0 mm×27 mm
1) For mushroom pushbutton, EMERGENCY-STOP and push-pull button: Note mushroom diameter d = 40 mm or 60 mm.
2) 60 mm with switch blocks having two contacts.
a 30 1) 30 1) 30 1) 30 1)
b 45 30 1) 30 1) 50
30 1) 30 1)
45 2) 60
Pushbutton with raised front ring
Pushbutton...
Similar Datasheet