BlueNRG-MS
Upgradable Bluetooth® low energy network processor
WLCSP34 QFN32
Product summary
Order code
BLUENRG-MSQT...
BlueNRG-MS
Upgradable Bluetooth® low energy network processor
WLCSP34 QFN32
Product summary
Order code
BLUENRG-MSQTR
Package
QFN32 (5x5 mm)
Packing
Tape and reel
Order code
BLUENRG-MSCSP
Package
WLCSP34 (2.66x2.56 mm)
Packing
Tape and reel
Features
Bluetooth specification v4.2 compliant master and slave single-mode Bluetooth low energy network processor
Embedded Bluetooth low energy protocol stack: GAP, GATT, SM, L2CAP, LL, RF-PHY
Bluetooth low energy profiles provided separately Operating supply voltage: from 1.7 to 3.6 V 8.2 mA maximum TX current (@0 dBm, 3.0 V) Down to 1.7 µA current consumption with active BLE stack Integrated linear
regulator and DC-DC step-down converter Up to +8 dBm available output power (at antenna connector) Excellent RF link budget (up to 96 dB) Accurate RSSI to allow power control Proprietary application controller interface (ACI), SPI based, allows interfacing
with an external host application microcontroller Full link controller and host security High performance, ultra-low power Cortex-M0 32-bit based architecture core Upgradable BLE stack (stored in embedded Flash memory, via SPI) AES security co-processor Low power modes 16 or 32 MHz crystal oscillator 12 MHz ring oscillator 32 kHz crystal oscillator 32 kHz ring oscillator Battery voltage monitor Compliant with the following radio frequency regulations: ETSI EN 300 328, EN
300 440, FCC CFR47 Part 15, ARIB STD-T66 Available in QFN32...