Automotive 3ch Half Bridge Driver
Datasheet
Motor / Actuator Drivers for DC Brush Motor Series
Automotive 3ch Half Bridge Driver with SPI Control
BD169...
Description
Datasheet
Motor / Actuator Drivers for DC Brush Motor Series
Automotive 3ch Half Bridge Driver with SPI Control
BD16933EFV-C
General Description
The BD16933EFV-C is 3ch half bridge driver for automotive applications. It can drive compact DC brush motors directly and each output can be controlled in three modes (High, Low and High Impedance). MCU can control the driver via 16bit Serial Interface (SPI). The part is 60V rated with low ON resistance packaged in compact HTSSOP-20 package, which contributes to realize high reliability, low energy consumption and low cost.
Features
■ AEC-Q100 Qualified(Note 1) ■ 1.0A DMOS Half Bridge 3 Circuits ■ Three Mode Output Control
(High, Low & High Impedance)
■ Low Standby Current ■ Built-in Protection Diode Against Output Reverse
Voltage ■ Over Current Detection(OCD) ■ Under Load Detection(ULD) ■ Over Voltage Protection
at Output Power Supply Stage(OVP) ■ Under Voltage Lock Out
at Output Power Supply Stage(UVLO) ■ Thermal Shut...
Similar Datasheet