3V Single-Channel Analog Front-End
MCP3918
3V Single-Channel Analog Front End
Features:
• One 24-Bit Resolution Delta-Sigma A/D Converter
• 93.5 dB SINAD,...
Description
MCP3918
3V Single-Channel Analog Front End
Features:
One 24-Bit Resolution Delta-Sigma A/D Converter
93.5 dB SINAD, -107 dBc Total Harmonic Distortion (THD) (up to 35th harmonic), 112 dB Spurious-Free Dynamic Range (SFDR)
Flexible Serial Interface that Includes Both SPI and a Simple Two-Wire Interface Ideal for Polyphase Shunt Energy Meters
Advanced Security Features:
- 16-Bit Cyclic Redundancy Check (CRC) Checksum on All Communications for Secure Data Transfers
- 16-Bit CRC Checksum and Interrupt Alert for Register Map Configuration
- Register Map Lock with 8-Bit Secure Key
2.7V-3.6V AVDD, DVDD Programmable Data Rate, Up to 125 ksps:
- 4 MHz Maximum Sampling Frequency
- 16 MHz Maximum Master Clock
Oversampling Ratio, Up to 4096
Ultra Low-Power Shutdown Mode with < 10 µA
Low-Drift 1.2V Internal Voltage Reference: 9 ppm/°C
Differential Voltage Reference Input Pins
High-Gain Programmable Gain Amplifier (PGA) (up to 32 V/V)
Phase Delay Compensation with 1 µs Time Resolution
Separate Data Ready Pin for Easy Synchronization
Individual 24-Bit Digital Offset and Gain Error Correction
High-Speed 20 MHz SPI Interface with Mode 0,0 and 1,1 Compatibility
Continuous Read/Write Modes for Minimum Communication with Dedicated 16-/32-Bit Modes
Available in 20-Lead QFN and SSOP Packages
Extended Temperature Range: -40°C to +125°C (all specifications are valid down to -45°C)
Description:
The MCP3918 is a 3V single-channel Analog Front End (AFE), containing...
Similar Datasheet