Differential Fanout Buffer
MC100E210
5V ECL Dual 1:4, 1:5
Differential Fanout Buffer
The MC100E210 is a low voltage, low skew dual differential EC...
Description
MC100E210
5V ECL Dual 1:4, 1:5
Differential Fanout Buffer
The MC100E210 is a low voltage, low skew dual differential ECL fanout buffer designed with clock distribution in mind. The device features two fanout buffers, a 1:4 and a 1:5 buffer, on a single chip. The device features fully differential clock paths to minimize both device and system skew. The dual buffer allows for the fanout of two signals through a single chip, thus reducing the skew between the two fundamental signals from a part−to−part skew down to an output−to−output skew. This capability reduces the skew by a factor of 4 as compared to using two LVE111’s to accomplish the same task.
The lowest TPD delay time results from terminating only one output pair, and the greatest TPD delay time results from terminating all the output pairs. This shift is about 10−20 pS in TPD. The skew between any two output pairs within a device is typically about 25 nS. If other output pairs are not terminated, the lowest TPD d...
Similar Datasheet