Transceiver
RN2483
Low-Power Long Range LoRa® Technology Transceiver Module
General Features
• On-Board LoRaWAN™ Protocol Stack • A...
Description
RN2483
Low-Power Long Range LoRa® Technology Transceiver Module
General Features
On-Board LoRaWAN™ Protocol Stack ASCII Command Interface over UART Compact Form Factor: 17.8 x 26.7 x 3.34 mm Castellated SMT Pads for Easy and Reliable PCB
Mounting Environmentally Friendly, RoHS Compliant European RED Certified Radio Module Device Firmware Upgrade (DFU) over UART, see
“RN2483 LoRa® Technology Module Command Reference User’s Guide” (DS40001784)
Operational
Single Operating Voltage: 2.1V to 3.6V (3.3V typical)
Temperature Range: -40°C to +85°C Low-Power Consumption Programmable RF Communication Bit Rate up to
300 kbps with FSK Modulation, 10937 bps with LoRa Technology Modulation Integrated MCU, Crystal, EUI-64 Node Identity Serial EEPROM, Radio Transceiver with Analog Front End, Matching Circuitry 14 GPIOs for Control and Status, Shared with 13 Analog Inputs
RF/Analog Features
Low-Power Long Range Transceiver Operating in the 433 MHz and 868 MHz Frequency Bands
High Receiver Sensitivity: Down to -146 dBm TX Power: Adjustable up to +14 dBm high
Efficiency PA FSK, GFSK and LoRa Technology Modulation IIP3 = -11 dBm Up to 15 km Coverage at Suburban and up to 5
km Coverage at Urban Area
Description
Microchip’s RN2483 Low-Power Long Range LoRa Technology Transceiver module provides an easy-touse, low-power solution for long range wireless data transmission. The advanced command interface offers rapid time to market.
The RN2483 module complies wi...
Similar Datasheet