FT2232C Dual USB UART / FIFO I.C.
1.0 Introduction
The FT2232C is the 3rd generation of FTDI’s popular USB UART / FIFO ...
FT2232C Dual USB UART / FIFO I.C.
1.0 Introduction
The FT2232C is the 3rd generation of FTDI’s popular USB UART / FIFO I.C. family. This device features two Multi-
Purpose UART / FIFO controllers which can be configured individually in several different modes. As well as a UART
interface, FIFO interface and Bit-Bang IO modes of the 2nd generation FT232BM and FT245BM devices, the FT2232C
offers a variety of additional new modes of operation, including a Multi-Protocol Synchronous Serial Engine interface
which is designed specifically for synchronous serial protocols such as JTAG and SPI bus.
1.1 Features Summary
HARDWARE FEATURES
Reset input and Reset Output pins
Single Chip USB Dual Channel Serial / Parallel 5V and 3.3V logic IO Interfacing with independent
Ports with a variety of configurations
level conversion on each channel
Entire USB protocol handled on the chip...no USB- Integrated 3.3V LDO
Regulator for USB IO
specific firmware programming ...