64-Mbit 3.0 V SPI Flash Memory
Not Recommended for New Designs
S25FL064P
64-Mbit 3.0 V SPI Flash Memory
This product family has been retired and is n...
Description
Not Recommended for New Designs
S25FL064P
64-Mbit 3.0 V SPI Flash Memory
This product family has been retired and is not recommended for designs. For new and current designs, S25FL064L supersede S25FL064P. These are the factory-recommended migration paths. Please refer to the S25FL-L Family data sheets for specifications and ordering information.
Distinctive Characteristics
Architectural Advantages Single power supply operation
– Full voltage range: 2.7 to 3.6V read and write operations Memory architecture
– Uniform 64-kB sectors – Top or bottom parameter block (Two 64-kB sectors (top or bottom) broken down into sixteen 4-kB sub-sectors each)
– 256-byte page size – Backward compatible with the S25FL064A device Program – Page Program (up to 256 bytes) in 1.5 ms (typical) – Program operations are on a page by page basis – Accelerated programming mode via 9V W#/ACC pin – Quad Page Programming Erase – Bulk erase function – Sector erase (SE) command ...
Similar Datasheet