SPI BUS EEPROM
Datasheet
Serial EEPROM Series Standard EEPROM
SPI BUS EEPROM
BR25G256-3
General Description BR25G256-3 is a 256Kbit s...
Description
Datasheet
Serial EEPROM Series Standard EEPROM
SPI BUS EEPROM
BR25G256-3
General Description BR25G256-3 is a 256Kbit serial EEPROM of SPI BUS interface.
Features High Speed Clock Action up to 20MHz (Max) Wait Function by HOLDB Terminal Part or Whole of Memory Arrays Settable as Read
only Memory Area by Program 1.6V to 5.5V Single Power Source Operation Most
Suitable for Battery Use. UP to 64 Byte in Page Write Mode. For SPI bus interface (CPOL, CPHA) = (0, 0), (1, 1) Self-timed Programming Cycle Low Current Consumption
At Write Action (5V) : 0.6mA (Typ) At Read Action (5V) : 2.0mA (Typ) At Standby Action (5V) : 0.1µA (Typ) Address Auto Increment Function at Read Action Prevention of Write Mistake Write Prohibition at Power On Write Prohibition by Command Code (WRDI) Write Prohibition by WPB Pin Write Prohibition Block Setting by Status Registers
(BP1, BP0) Prevention of Write Mistake at Low Voltage More than 100 years Data Retention. More than 1 Million Write Cycles. Bit Format 32K×8 Initial Delivery Data
Memory Array: FFh
Status Register: WPEN, BP1, BP0 : 0
Packages W(Typ) x D(Typ) x H(Max)
Not Recommended for New Designs
DIP-T8 9.30mm x 6.50mm x 7.10mm
SOP- J8 4.90mm x 6.00mm x 1.65mm
SOP8 5.00mm x 6.20mm x 1.71mm
TSSOP-B8 3.00mm x 6.40mm x 1.20mm
Figure 1.
Product structure: Silicon monolithic integrated circuit This product is not designed protection against radioactive rays
www.rohm.com ©2013 ROHM Co., Ltd. All righ...
Similar Datasheet