Dual DMOS Full-Bridge Motor Driver
A3916
Dual DMOS Full-Bridge Motor Driver
FEATURES AND BENEFITS
• Wide, 2.7 to 15 V input voltage operating range • Dua...
Description
A3916
Dual DMOS Full-Bridge Motor Driver
FEATURES AND BENEFITS
Wide, 2.7 to 15 V input voltage operating range Dual DMOS full-bridges: drive two DC motors or
one stepper motor Low RDS(ON) outputs Synchronous rectification for reduced power dissipation Low-current sleep mode Overcurrent protection Internal UVLO and thermal shutdown circuitry Integrated charge pump Pin-to-pin compatible with A3906
PACKAGES:
16-contact QFN 3 mm × 3 mm (suffix ES)
DESCRIPTION
Designed for pulse-width-modulated (PWM) control of lowvoltage stepper motors and single and dual DC motors, the A3916 is capable of output currents up to 1 A per channel and operating voltages from 2.7 to 15 V.
The A3916 has an internal fixed off-time PWM timer that sets a peak current based on the selection of a current sense resistor. An output fault flag is provided that notifies the user of a TSD or overcurrent protection event.
The A3916 is supplied in a low-profile 3 × 3 mm 16-terminal QFN (suffix “ES”) and a low-profile 4 × 4 mm 20-terminal QFN (suffixes “ES, -1”) both with exposed power tabs for enhanced thermal dissipation.
20-contact QFN 4 mm × 4 mm (suffix ES,-1)
Not to scale
VCP
SLEEPn
IN1 IN2 CINL3K IN4
VBB
A3916
OUT1A OUT1B
FAULTn
SENSE1
OUT2A OUT2B
GND
SENSE2
0.1 µF 2.7 to 15 V
DC Motor
DC Motor
VCP
SLEEPn
IN1 IN2 CINL3K IN4
A3916
VBB
OUT1A OUT1B
FAULTn GND
SENSE1 OUT2A OUT2B
SENSE2
0.1 µF 2.7 to 15 V
Step Motor
A3916-DS, Rev. 6 MCO-0000139
Figure 1: Typical Applicati...
Similar Datasheet