Dual Digital Potentiometers
DP7411
Dual Digital Potentiometers (DP) with 64 Taps and SPI Interface
FEATURES
Two linear-taper digital potentiometer...
Description
DP7411
Dual Digital Potentiometers (DP) with 64 Taps and SPI Interface
FEATURES
Two linear-taper digital potentiometers
64 resistor taps per potentiometer End to end resistance 2.5k, 10k, 50k or 100k Potentiometer control and memory access via SPI interface: Mode (0, 0) and (1, 1) Low wiper resistance, typically 80 Nonvolatile memory storage for up to four wiper settings for each potentiometer Automatic recall of saved wiper settings at power up 2.5 to 6.0 volt operation Standby current less than 1µA 24-lead SOIC and 24-lead TSSOP Industrial temperature ranges
DESCRIPTION
The DP7411 is two Digital Potentiometers (DPs) integrated with control logic and 16 bytes of NVRAM memory. Each DP consists of a series of 63 resistive elements connected between two externally accessible end points. The tap points between each resistive element are connected to the wiper outputs with CMOS switches. A separate 6-bit control register (WCR) independently controls the wiper tap switches for e...
Similar Datasheet