PHOTODIODE
SMP600G-EL
MECHANICAL DATA Dimensions in mm.
WINDOW Ø 5.9 ± 0.1
Ø 9.1 ± 0.2 Ø 8.1 ± 0.1
SE NSITIVE SURF ACE
P.I.N. ...
Description
SMP600G-EL
MECHANICAL DATA Dimensions in mm.
WINDOW Ø 5.9 ± 0.1
Ø 9.1 ± 0.2 Ø 8.1 ± 0.1
SE NSITIVE SURF ACE
P.I.N. PHOTODIODE
FEATURES
HIGH SENSITIVITY EYE RESPONSE DETECTION EXCELLENT LINEARITY LOW NOISE WIDE SPECTRAL RESPONSE BG18 INTEGRAL OPTICAL FILTER TO39 HERMETIC METAL CAN PACKAGE EMI SCREENING MESH AVAILABLE
20 3.8 ± 0.2
Ø 0.45 LEAD 5.08 ± 0.2
21
TO-39 Package
Pin 1 – Anode
Pin 2 –Cathode & Case
DESCRIPTION
The SMP600G-EL is a Silicon P.I.N. photodiode incorporated in a hermetic metal can package. The electrical terminations are via two leads of diameter 0.018" on a pitch centre diameter of 0.2". The can structure incorporates an photoptic response optical filter with peak transmission at 510nm. The cathode of the photodiode is electrically connected to the package.
The larger photodiode active area provides greater sensitivity than the SMP550 range of devices, with a slight reduction in speed. Inherent in the device geometry is a reduction in the receiving angle. The photodiode structure has been optimised for high sensitivity, asymmetric light measurement applications. The metal can, isolated photodiode and optional screening mesh ensure a rugged device with a high degree of immunity to conducted and radiated electrical interference.
ABSOLUTE MAXIMUM R ATINGS(Tcase = 25°C unless otherwise stated)
Operating temperature range Storage temperature range Temperature coefficient of responsively Temperature coefficient of dark current Reverse br...
Similar Datasheet