3-Pin Microprocessor Reset Circuits
AP0809
Chipown
Description
The AP0809 microprocessor supervisory circuit can be used to monitor the power supplies in ...
Description
AP0809
Chipown
Description
The AP0809 microprocessor supervisory circuit can be used to monitor the power supplies in microprocessor and digital systems. It provides a reset to the microprocessor during power-up, power-down, and brown-out conditions. The function of the AP0809 is to monitor the VCC supply voltage, and assert a reset signal whenever this voltage declines below the factory-programmed reset threshold. The reset signal remains asserted for 250ms after VCC rises above the threshold. The AP0809 has an active-low RESET output. With a low supply current of only 2μA (Typ.), the AP0809 are ideal for use in portable equipment. The AP0809 is available in the 3-pin SOT23 package.
Applications
Microprocessor Systems Computers Controllers Intelligent Instruments Portable/Battery-Powered Equipment Automotive
3-Pin Microprocessor Reset Circuits
Features
Precise monitoring of 2.7V, 3.0V, 3.3V and 5.0V supplies
140 ms min. Power-On Reset pulse width, 250ms typical, has an active-low RESET Output
Guaranteed RESET Output valid for VCC≥1.1 V Low Supply Current, 2μA Typ. Available in small SOT23 package No external components needed Specified over full temperature range
-40°Cto+105°C
Package
Typical Application
Function Diagram
Figure 2 Typical Application
Figure 3 Function Digram
8/F, ChuangYuan Building No.21-1 Changjiang Road, Wuxi New Destrict Tel: +86(510)8521-7718 Ver 1.3 http://www.chipown.com.cn
1
AP0809
Chipown
PIN Description
Pin No. P...
Similar Datasheet