SERIAL ATA II: PORT MULTIPLIER / PORT SELECTOR
EXSTOR - 1 XRS10L240
SERIAL ATA II: PORT MULTIPLIER / PORT SELECTOR
JANUARY 2009
REV. 1.05
FEATURES
GENERAL FEATURES
...
Description
EXSTOR - 1 XRS10L240
SERIAL ATA II: PORT MULTIPLIER / PORT SELECTOR
JANUARY 2009
REV. 1.05
FEATURES
GENERAL FEATURES
Six independent 3/1.5Gbps SATA ports. Connects 2 host ports to 4 device ports. Supports 3/1.5Gbps rate detection/speed
negotiation.
Supports power down modes - Active, partial,
slumber and power down.
Advanced features configurable through MDIO
bus.
PORT MULTIPLIER/SELECTOR LOGIC FEATURES
Low latency architecture. Supports OOB signaling for SATA applications.
Internal OOB detectors for COMRESET/ COMINIT and COMWAKE.
I/O FEATURES
High speed outputs with programmable pre-
emphasis to drive long interconnects.
Selectable high speed input equalization for
optimum reception.
Compliant with SATA Gen-2i & Gen-2m
specification.
Enables reliable data transmission over 1 meter
or more of FR-4 and 4 meters or more of unequalized copper cable.
Selectable spread spectrum clocking (SSC) to
reduce EMI.
PHYSICAL FEATURES
CMOS 0.13 Micron Technology Single 1.2 V Power Supply -40°C to 85°C Industrial Temperature Range No heatsink or airflow required 100-Pin LQFP Package
1.0 INTRODUCTION
The XRS10L240 provides the combined advantages of the Serial ATA II Port Selector and Port Multiplier implementations for Serial ATA II systems at 3.0 Gbps and 1.5 Gbps. Combining the capability to address four Serial ATA devices from one external link with support for a failover path from two
independent hosts, the XRS10L240 offers a leading solution for pro...
Similar Datasheet