1A Battery Gas Gauge
Features
n Indicates Accumulated Battery Charge and Discharge
n SMBus/I2C Interface n Integrated 50mΩ High Side Sense...
Description
Features
n Indicates Accumulated Battery Charge and Discharge
n SMBus/I2C Interface n Integrated 50mΩ High Side Sense Resistor n ±1A Sense Current Range n High Accuracy Analog Integration n ADC Measures Battery Voltage and Temperature n Integrated Temperature Sensor n 1% Voltage and Charge Accuracy n Configurable Alert Output/Charge Complete Input n 2.7V to 5.5V Operating Range n Quiescent Current Less than 100µA n Small 6-Pin 2mm × 3mm DFN package
Applications
n Low Power Handheld Products n Cellular Phones n MP3 Players n Cameras n GPS
LTC2942-1 1A Battery Gas Gauge with
Internal Sense Resistor and Temperature/Voltage Measurement
Description
The LTC®2942-1 measures battery charge state, battery voltage and chip temperature in handheld PC and portable product applications. Its operating range is perfectly suited for single cell Li-Ion batteries. A precision coulomb counter integrates current through an internal sense resistor between the battery’s positive terminal and the load or charger. Battery voltage and on-chip temperature are measured with an internal 14-bit No Latency ∆Σ™ ADC. The three measured quantities (charge, voltage and temperature) are stored in internal registers accessible via the onboard SMBus/I2C interface. The LTC2942-1 features programmable high and low thresholds for all three measured quantities. If a programmed threshold is exceeded, the device communicates an alert using either the SMBus alert protocol or by setting a flag in the i...
Similar Datasheet