Octal D-Type Flip-Flops
Standard Products
UT54ACS374/UT54ACTS374
Octal D-Type Flip-Flops with Three-State Outputs
Datasheet November 2010 www.a...
Description
Standard Products
UT54ACS374/UT54ACTS374
Octal D-Type Flip-Flops with Three-State Outputs
Datasheet November 2010 www.aeroflex.com/logic
FEATURES 8 latches in a single package Three-state bus-driving true outputs Full parallel access for loading 1.2μ CMOS
- Latchup immune High speed Low power consumption Single 5 volt supply Available QML Q or V processes Flexible package
- 20-pin DIP - 20-lead flatpack UT54ACS374 - SMD 5962-96590 UT54ACTS374 - SMD 5962-96591
DESCRIPTION
The UT54ACS374 and the UT54ACTS374 are non-inverting octal D type flip-flops with three-state outputs designed for driving highly capacitive or relatively low-impedance loads. The device is suitable for buffer registers, I/O ports, and bidirectional bus drivers.
The eight flip-flops are edge triggered D-type flip-flops. On the positive transition of the clock the Q outputs will follow the data (D) inputs.
An output-control input (OC) places the eight outputs in either a normal logic state (high or low logic level) or a high-impedance state. The high-impedance third state and increased drive provide the capability to drive the bus line in a bus-organized system without the need for interface or pull-up components.
The output control OC does not affect the internal operations of the flip-flops. Old data can be retained or new data can be entered while the outputs are off.
The devices are characterized over full military temperature range of -55°C to +125°C.
FUNCTION TABLE
INPUTS
...
Similar Datasheet