Advanced Power
Electronics Corp.
APE8838
DUAL CHANNEL LDO REGULATORS WITH ENABLE
FEATURES
Input Voltage Range : 2.5V...
Advanced Power
Electronics Corp.
APE8838
DUAL CHANNEL LDO
REGULATORS WITH ENABLE
FEATURES
Input Voltage Range : 2.5V to 6V Varied Fixed Output Voltage Combinations 150mV Dropout at 100mA Output Current (Vout≧2.8V) Output Current: 200mA/channel (typ.) Low Quiescent Current Standby Current: 2uA (typ.) Current Limit and Short Current Protections Thermal Shutdown Protection Fast Transient Response Low ESR Capacitor Compatible (X7R, X5R) Available in the 6-Pin Pb-Free SOT-26 and DFN 2x2 Packages
DESCRIPTION
The APE8838 is a high accurately, low noise, high ripple rejection ratio, low dropout, dual CMOS LDO voltage
regulators with enable function. The EN function allows the output of each
regulator to be turned off independently, resulting in greatly reduced power consumption.
The APE8838 has the soft start function to suppress the inrush current. The current limit is over 250mA per channel and also operates as a short protection for the output current limiter. The output voltage for each
regulator is set independently by metal trimming.
The APE8838 is fully compatible with low ESR ceramic capacitors, reducing cost and improving output stability. This high level output stability is maintained even during frequent load fluctuations, due to the excellent transient response performance and high PSRR achieved across a broad range of frequency. It is available in the SOT-26 and DFN 2x2 packages.
TYPICAL APPLICATION
VIN C IN
VOUT2
1uF
EN2 VIN EN1 VOUT2 VOUT1
COUT2
GND
APE8838
...