Document
PRoC™ BLE: CYBL1XX7X Family Datasheet
Programmable Radio-on-Chip With Bluetooth Low Energy
General Description
PRoC™ BLE is a 32-bit, 48-MHz ARM® Cortex®-M0 BLE solution with CapSense®, 12-bit ADC, four timer, counter, pulse-width modulators (TCPWM), Direct memory access (DMA), thirty-six GPIOs, two serial communication blocks (SCBs), LCD, and I2S. PRoC BLE includes a royalty-free BLE stack compatible with Bluetooth® 4.2 and provides a complete, programmable, and flexible solution for HID, remote controls, toys, beacons, and wireless chargers. In addition to these applications, PRoC BLE provides a simple, low-cost way to add BLE connectivity to any system.
Features
Bluetooth® Smart Connectivity ■ Bluetooth 4.2 single-mode device ■ 2.4-GHz BLE radio and baseband with integrated balun ■ TX output power: –18 dBm to +3 dBm ■ Received signal strength indicator (RSSI) with 1-dB resolution ■ RX sensitivity: –92 dBm ■ TX current: 15.6 mA at 0 dBm ■ RX current: 16.4 mA
ARM Cortex-M0 CPU Core ■ 32-bit processor (0.9 DMIPS/MHz) with single-cycle 32-bit
multiply, operating at up to 48 MHz ■ 256-KB flash memory ■ 32-KB SRAM memory ■ Emulated EEPROM using flash memory ■ Watchdog timer with dedicated internal low-speed oscillator
(ILO) ■ Eight-channel direct memory access (DMA) controller
Ultra-Low-Power ■ 1.5-µA Deep-Sleep mode with watch crystal oscillator (WCO)
on ■ 150-nA Hibernate mode current with SRAM retention ■ 60-nA Stop mode current with GPIO wakeup CapSense® Touch Sensing with Two-Finger Gestures ■ Up to 36 capacitive sensors for buttons, sliders, and touchpads ■ One-finger gestures: finger tracking, scroll, inertial scroll,
edge-swipe, click, double-click ■ Two-finger gestures: scroll, inertial scroll, zoom-in, zoom-out ■ Cypress Capacitive Sigma-Delta (CSD) provides best-in-class
SNR (> 5:1) and liquid tolerance ■ Automatic hardware-tuning algorithm (SmartSense™)
Peripherals ■ 12-bit, 1-Msps SAR ADC with internal reference,
sample-and-hold (S/H), and channel sequencer ■ Ultra-low-power LCD segment drive for 128 segments with
operation in Deep-Sleep mode
■ Two serial communication blocks (SCBs) supporting I2C (Master/Slave), SPI (Master/Slave), or UART
■ Four dedicated 16-bit TCPWMs ❐ Additional four 8-bit or two 16-bit PWMs
■ Programmable LVD from 1.8 V to 4.5 V ■ I2S Master interface
Clock, Reset, and Supply ■ Wide supply-voltage range: 1.9 V to 5.5 V ■ 3-MHz to 48-MHz internal main oscillator (IMO) with 2%
accuracy ■ 24-MHz external clock oscillator (ECO) without load
capacitance ■ 32-kHz WCO
Programmable GPIOs ■ 36 GPIOs configurable as open drain high/low,
pull-up/pull-down, HI-Z, or strong output ■ Any GPIO pin can be CapSense, LCD, or analog, with flexible
pin routing
Programming and Debug ■ 2-pin SWD ■ In-system flash programming support
Temperature and Packaging ■ Operating temperature range: –40 °C to +105 °C ■ Available in 56-pin QFN (7 mm × 7 mm) and 76-ball WLCSP
(3.52 mm × 3.91 mm) packages PSoC® Creator™ Design Environment ■ Easy-to-use IDE to configure, develop, program, and test a
BLE application ■ Option to export the design to Keil, IAR, or Eclipse
Bluetooth Low Energy Protocol Stack ■ Bluetooth Low Energy protocol stack supporting generic
access profile (GAP) Central, Peripheral, Observer, or Broadcaster roles ❐ Switches between Central and Peripheral roles on-the-go ■ Standard Bluetooth Low Energy profiles and services for interoperability ❐ Custom profile and service for specific use cases
Cypress Semiconductor Corporation • 198 Champion Court Document Number: 001-95464 Rev. *J
• San Jose, CA 95134-1709 • 408-943-2600
Revised September 16, 2016
PRoC™ BLE: CYBL1XX7X Family Datasheet
More Information
Cypress provides a wealth of data at http://www.cypress.com to help you to select the right PSoC device for your design, and to help you to quickly and effectively integrate the device into your design. For a comprehensive list of resources, see the introduction page for Bluetooth® Low Energy (BLE) Products. Following is an abbreviated list for PRoC BLE: ■ Overview: PSoC Portfolio, PSoC Roadmap ■ Product Selectors: PSoC 1, PSoC 3, PSoC 4, PRoC BLE,
PSoC 4 BLE, PSoC 5LP In addition, PSoC Creator includes a device selection tool. ■ Application Notes: Cypress offers a large number of PSoC application notes converting a broad range of topics, from basic to advanced level. Recommended application notes for getting started with PRoC BLE are: ❐ AN94020: Getting Started with PRoC BLE ❐ AN97060: PSoC 4 BLE and PRoC BLE - Over-The-Air (OTA)
Device Firmware Upgrade (DFU) Guide ❐ AN91184: PSoC 4 BLE - Designing BLE Applications ❐ AN91162: Creating a BLE Custom Profile ❐ AN91445: Antenna Design and RF Layout Guidelines ❐ AN96841: Getting Started With EZ-BLE Module ❐ AN85951: PSoC 4 CapSense Design Guide
PSoC Creator
❐ AN95089: PSoC 4/PRoC BLE Crystal Oscillator Selection and Tuning Techniques
❐ AN92584: Designing for Low Power and Estimating Battery Life for BLE Applications
■ Technical Reference M.