LV5213LP

Ordering number : ENA0183A LV5213LP Bi-CMOS LSI 3ch LED Driver http://onsemi.com Overview This LV5213LP is LED driver for cell phones. Each LED driver gets a constant current controlled. The brilliance control becomes possible by changing the current value that flows to LED by the serial bus control. LV5213LP can achieve various effects of the illumination of a full-color LED display. Functions Three color LED driver circuits. The LED current can be switched independently in 5-bit units (0 to 5mA). Independent on/off control of the three LED drivers (independent control of the 3 RGB colors). Each LED drive current level can be adjusted independently over the serial bus. Miniature package. Thermal shutdown circuit. Specifications Absolute Maximum Ratings at Ta = 25°C Parameter Symbol Conditions Supply voltage 1 Supply voltage 2 Allowable power dissipation VCC max VDD max Pd max Mounted on the specified board * Maximum input current Maximum output current STBY pin voltage Operating temperature VINB IO max VSTBY Topr Storage temperature Tstg The specified board *: 50mm × 40mm × 0.8mm glass epoxy (4-layer circuit board). Ratings 6.0 6.0 5.5 6.0 12.0 6.0 -30 to +75 -40 to +125 Unit V V W V mA V °C °C Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions ma...