Programmable DC-DC Converter
LV52133A
Programmable DC-DC Converter, ±5V dual-output, Single-Inductor
Overview LV52133A0XA and LV52133A5XA are dc-dc...
Description
LV52133A
Programmable DC-DC Converter, ±5V dual-output, Single-Inductor
Overview LV52133A0XA and LV52133A5XA are dc-dc converters specifically designed for LCD panels. These dc-dc converters generate two different output voltages from a single inductor. Each of the output voltages are adjustable from ±4.1 V to ±5.7V. LCD panel power modules using these dc-dc converters can be implemented within smaller board footprints, compared to converters that require dual inductors. The short circuit protection function, integrated for both positive and negative output pins, provides protection from continuous overcurrent when the output is shorted. This feature enhances the safety of the design. The extremely low standby current (0.3μA typical) enables longer application operating time.
The differences of the LV52133A0XA-VH and LV52133A5XA-VH are
shown in below table.
Table. Correspondence table of between Vout1/2’s default voltages and the marking vs product names
Default voltages Marking
LV52133A0XA-VH ±5.0V
133A0 YMXX
LV52133A5XA-VH ±5.5V
133A5 YMXX
Features Dual-Outputs by Single-Inductor architecture VOUT1 default output voltage (+5.0V/+5.5V) VOUT2 default output voltage (–5.0V/ –5.5V) Adjustable both output voltages by I2C (I2C disable at standby) Operating voltage range 2.5V to 5.5V High speed inverted charge pump technology Short Circuit Protection Standby current dissipation 0.3A
Typical Applications Mobile LCD panel power supply General around ±5.0V...
Similar Datasheet