SAW FILTER
NSNJ2000 Nov-2013
NewJRC SAW FILTER
NSNJ2000
Application
PHS-IF f0=265.55MHz BW=0.2MHz
Electrical Specification: (Tab...
Description
NSNJ2000 Nov-2013
NewJRC SAW FILTER
NSNJ2000
Application
PHS-IF f0=265.55MHz BW=0.2MHz
Electrical Specification: (Table 1) The device characteristics are measured in the circuit shown in Fig.1.
Table 1. Electrical Specifications
Item
Spec.
Typ.
Nominal Center Frequency (f0) 3dB Band Width (from f0)
265.55MHz ±130kHz min.
±275 kHz
Insertion Loss at f0 Ripple Group Delay Time Ripple Out of Band Rejection
(Relative to Through Level)
f0±100kHz f0±100kHz f0±600kHz f0±1.2MHz f0±21.5~21.7MHz
4.0dB max. 1.2dB max. 1.2usec max. 25dB min. 40dB min. 60dB min.
3.2dB 0.8dB 0.5usec 30dB 60dB 63dB
(Operating Temperature Range : -20~+85ºC)
Maximum Rating: (Table 2)
Table2. Maximum Ratings Item Maximum Input Power Maximum DC Voltage Operating Temperature Range Storage Temperature
Rating +0dBm 7.5V -20~+85ºC -30~+85ºC
Mechanical Specifications: (Fig.2) Package is designed as small as 3.0x3.0x1.15[mm3] for SMD (Surface Mount Device) type.
Notice: This part is electrostatic discharge sensitive and may be damaged by improper handling.
http://www.njr.co.jp/products/device/index.html http://www.njr.com/products/device/index.html
110nH LQW18A
16
IN
110nH LQW18A
2 SAW 5
50Ω 2pF
34
GRM18
2pF GRM18
Fig.1 Measuring circuit
(a) 3. 0±0. 15 ( b)
3X2
3. 0 ± 0. 1 5
P7
( c) ( 1)
NSNJ2000 Nov-2013
OUT 50Ω
1. 1 5 ± 0. 1 5
( 2)
( 0. 6)
34
2
( 1. 80)
1
5 6
( 0. 45)
( 0. 75)
[ 4x]
Fig.2 Package dimensions (in mm)
3.8
2.2 1.15
( 0. 2 5) ( 0. 6) [ 2 x]
( 0. 5 3) [ 4 x]
...
Similar Datasheet