Dual TxDAC+ Digital-to-Analog Converters
Data Sheet
10-/12-/14-Bit, 125 MSPS Dual TxDAC+ Digital-to-Analog Converters
AD9763/AD9765/AD9767
FEATURES
10-/12-/14-...
Description
Data Sheet
10-/12-/14-Bit, 125 MSPS Dual TxDAC+ Digital-to-Analog Converters
AD9763/AD9765/AD9767
FEATURES
10-/12-/14-bit dual transmit digital-to-analog converters (DACs) 125 MSPS update rate Excellent SFDR to Nyquist @ 5 MHz output: 75 dBc Excellent gain and offset matching: 0.1% Fully independent or single-resistor gain control Dual-port or interleaved data On-chip 1.2 V reference 5 V or 3.3 V operation Power dissipation: 380 mW @ 5 V Power-down mode: 50 mW @ 5 V 48-lead LQFP
APPLICATIONS
Communications Base stations Digital synthesis Quadrature modulation 3D ultrasound
GENERAL DESCRIPTION
The AD9763/AD9765/AD9767 are dual-port, high speed, 2-channel, 10-/12-/14-bit CMOS DACs. Each part integrates two high quality TxDAC+® cores, a voltage reference, and digital interface circuitry into a small 48-lead LQFP. The AD9763/ AD9765/AD9767 offer exceptional ac and dc performance while supporting update rates of up to 125 MSPS.
The AD9763/AD9765/AD9767 have been optimized for processing I and Q data in communications applications. The digital interface consists of two double-buffered latches as well as control logic. Separate write inputs allow data to be written to the two DAC ports independent of one another. Separate clocks control the update rate of the DACs.
A mode control pin allows the AD9763/AD9765/AD9767 to interface to two separate data ports, or to a single interleaved high speed data port. In interleaving mode, the input data stream is demuxed into its original I and...
Similar Datasheet