Low-Jitter Configurable Dual CMOS Oscillator
DSC2011
Low-Jitter Configurable Dual CMOS Oscillator
General Description
The DSC2011 series of high performance dual o...
Description
DSC2011
Low-Jitter Configurable Dual CMOS Oscillator
General Description
The DSC2011 series of high performance dual output CMOS oscillators utilize a proven silicon MEMS technology to provide excellent jitter and stability while incorporating additional device functionality. The two CMOS outputs are controlled by separate supply voltages to allow for independent voltage level control. The frequencies of the outputs can be identical or independently derived from a common PLL frequency source. The DSC2011 has provision for up to eight user-defined pre-programmed, pinselectable output frequency combinations. The DSC2011 is also equipped with independent pin-selectable output drive strengths for each output to reduce EMI and noise.
DSC2011 is packaged in a 14-pin 3.2x2.5 mm QFN package and available in temperature grades from Ext. Commercial to Automotive.
Block Diagram
Features
Low RMS Phase Jitter: <1 ps (typ)
High Stability: ±10, ±25, ±50 ppm
Wide Temperature Range o Automotive: -55° to 125° C o Ext. Industrial: -40° to 105° C o Industrial: -40° to 85° C o Ext. commercial: -20° to 70° C
High Supply Noise Rejection: -50 dBc
Two Independent CMOS Outputs
Pin-Selectable Configurations o 2-bit Output Drive Strength o 3-bit Output Frequency Combinations
Short Lead Times: 2 Weeks
Wide Freq. Range: o CMOS Output: 2.3 to 170 MHz
Miniature Footprint of 3.2x2.5mm
Excellent Shock & Vibration Immunity o Qualified to MIL-STD-883
High Reliability o 20x better MTF th...
Similar Datasheet