16 MHz CR8F 8-bit MCU
CR8F612X
16 MHz CR8F 8-bit MCU, up to 8 Kbytes Flash, 1 Kbyte RAM, 640 bytes EEPROM,10-bit ADC, 2 timers, UART, SPI, I²C...
Description
CR8F612X
16 MHz CR8F 8-bit MCU, up to 8 Kbytes Flash, 1 Kbyte RAM, 640 bytes EEPROM,10-bit ADC, 2 timers, UART, SPI, I²C
Preliminary data
Features
Core
■ 16 MHz advanced CR8Fcore with Harvard architecture and 3-stage pipeline
■ Extended instruction set
Memories
■ Program memory: 8 Kbytes Flash; data retention 20 years at 55 °C after 10 kcycles
■ Data memory: 640 bytes true data EEPROM; endurance 300 kcycles
■ RAM: 1 Kbytes
Clock, reset and supply management
■ 2.95 to 5.5 V operating voltage ■ Flexible clock control, 4 master clock sources:
– Low power crystal resonator oscillator – External clock input – Internal, user-trimmable 16 MHz RC – Internal low power 128 kHz RC ■ Clock security system with clock monitor ■ Power management: – Low power modes (wait, active-halt, halt) – Switch-off peripheral clocks individually ■ Permanently active, low consumption poweron and power-down reset
Interrupt management
■ Nested interrupt controller with 32 interrupts ■ Up to 28 external interrupts on 7 vectors
Timers
■ Advanced control timer: 16-bit, 4 CAPCOM channels, 3 complementary outputs, dead-time insertion and flexible synchronization
LQFP32 7x7
VFQFPN32 5x5
■ 16-bit general purpose timer, with 3 CAPCOM channels (IC, OC or PWM)
■ 8-bit basic timer with 8-bit prescaler ■ Auto wake-up timer ■ 2 watchdog timers: Window watchdog and
independent watchdog
Communications interfaces
■ UART with clock output for synchronous operation, Smartcard, IrDA, LIN master mode
■ SPI interface up t...
Similar Datasheet