BIG SOZA CELL
BSOZA301 THRU BSOZA306
TECHNICAL SPECIFICATION: FEATURES
• Low Leakage • Low forward voltage drop • High current capability • High forward surge current capacity
VOLTAGE RANGE CURRENT
100 to 600 Volts 30.0 Amperes
.299(7.6) DIA .283(7.2)
MECHANICAL DATA
• Copper slug • Technology: cell with vacuum soldered • Polarity: blue dots denotes cathode end • Mounting Position: Any • Weight: 0.0219 ounces, 0.62 grams
0.086(2.20) 0.078(2.0)
Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
• Ratings at 25℃ ambient temperature unless otherwise specified • Single Phase, half wave, 60HZ, resistive or inductive load • For capacitive load derate current by 20%
Maximum Repetitive Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current, At Tc=110℃ Peak Forward Surge Current 3.3mS single half sine wave superimposed on Rated load (JEDEC method) Maximum instantaneous Forward Voltage at 100A Maximum DC Reverse Current at Rated TA=25℃ DC Blocking Voltage per element TA=100℃
SYMBOLS VRRM VRMS VDC IO
IFSM
VF IR
Typical Thermal Resistance
RθJC
Operating and Storage Temperature Range
TJ,TSTG
Notes:
1. Enough heatsink must be considered in application.
BSOZA301 100 70 100
BSOZA302 200 140 200
BSOZA303 300 210 300
BSOZA304 400 280 400
30.0
400
1.1 5.0 250 1.0 (-65 to +175)
BSOZA306 600 420 600
UNIT Volts Volts Volts Amps
Amps
Volts UA ℃/W ℃
E-mail:
[email protected] Web Site: www.cnmic.com
BIG SOZA CELL BSOZA301 THRU BSOZA306
VOLTAGE RANGE CURRENT
100 to 600 Volts 30.0 Amperes
RATINGS AND CHARACTERISTIC CURVES BSOZA301 THRU BSOZA306
AVERAGE FORWARD CURRENT, (A)
F1G.1 TYPICAL FORWARD CURRENT DERATING GURVE
30 25 20
Single Phase 10
Half Wave 60Hz Resistive or Inductive Load 0.375″(9.5mm) Lead Length
0 110 0 25 50 75 100 125 150
CASE TEMPERATURE, (℃)
175
PEAK FORWARD SURGE CURRENT,(A)
F1G.2 MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT
400
8.3ms Single Half Sine-Wave 300 (JEDEC Method) Tj=Tj max
200
100 1 Cycle
1
2
4 6 8 10
20
40 60 80 100
NUMBER OF CYCLES AT 60 Hz
F1G.3 TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS
1000
100
10
T1=25℃ PULSE WIDTH=300μS
1%DUTY CYCLE 1.0
AVERAGE POWER DISSIPATION (W)
F1G.4 FORWARD ROWER DISSIPATION
60
40 SQUARE WAVE DC
20
0 0 10 20 30 40 50
AVERAGE FORWARD CURRENT, (A)
INSTANTANEOUS FORWARD CURRENT, (A)
0.1 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0
INSTANTANEOUS FORWARD VOLTAGE,(V)
E-mail:
[email protected] Web Site: www.cnmic.com
.