PASMA30CA

P4SMA SERIIES VBR : 6.8 - 440 Volts PPK : 400 Watts Features 400W surge capability at 1ms Excellent clamping capability Low zener impedance Fast response time : typically less then 1.0 ps from 0 volt to VBR(min.) Typical IR less then 1μA above 10V RoHS compliant package Applications For Bi-directional without “C” Electrical characteristics apply in both directions Mechanical Data Case : SMA Molded plastic Epoxy : UL94V-0 rate flame retardant Lead : Lead Formed for Surface Mount Polarity : Color band denotes cathode end Mounting position : Any Weight : 0.0.65 gram Packing & Order Information 5,000/Reel Graphic symbol MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating at 25 °C ambient temperature unless otherwise specified. Symbol Parameter PPK Peak Power Dissipation at Ta = 25ºC, Tp=1ms (Note1) PD Steady State Power Dissipation at TL = 75 °C IFSM TJ, TSTG Peak Forward Surge Current, 8.3ms Single Half Sine-Wave Superimposed on Rated Load (JEDEC Method) (Note 3) IFSM 100 Amps. Operating and Storage Temperature Range Value Minimum 400 1.0 40 -55 to + 150 Unit W W A °C Publication Order Number: [P4SMA SERIES] © Bruckewell Technology Corporation Rev. A -2 014 P4SMA SERIIES VBR : 6.8 - 440 Volts PPK : 400 Watts Notes: (1) Non-repetitive Current pulse, per Fig. 5 and derated above Ta = 25 °C per Fig. 1 (2) Mounted on copper Lead area at 5.0 mm2 ( 0.013 mm thick ). (3) 8.3 ms single half sine-wave, duty cycle = 4 pulses per Minutes maximum...