KAF-6303-AAA

KAF-6303 3072 (H) x 2048 (V) Full Frame CCD Image Sensor Description The KAF−6303 Image Sensor is a high performance CCD (charge-coupled device) with 3072 (H) × 2048 (V) photo active pixels designed for a wide range of image sensing applications. The sensor incorporates true two-phase CCD technology, simplifying the support circuits required to drive the sensor as well as reducing dark current without compromising charge capacity. The sensor also utilizes the TRUESENSE Transparent Gate Electrode to improve sensitivity compared to the use of a standard front side illuminated polysilicon electrode. Table 1. GENERAL SPECIFICATIONS Parameter Typical Value Architecture Full Frame CCD Total Number of Pixels 3088 (H) × 2056 (V) Number of Active Pixels 3072 (H) × 2048 (V) = approx. 6.3 Mp Pixel Size 9 mm (H) × 9 mm (V) Active Image Size 27.65 mm (H) × 18.48 mm (V) 33.4 mm (Diagonal) APS−H Optical Format Chip Size Saturation Signal Output Sensitivity 29.0 mm (H) × 19.1 mm (V) 100,000 e− 10 mV/e− Quantum Efficiency (450, 550, 650 mm) Readout Noise (10 MHz) Dark Current (Accumulation Mode) 40%, 52%, 65% 15 e− rms < 10 pA/cm2 Dark Current Doubling Rate 6°C Dynamic Range (Saturation Signal/Dark Noise) 76 dB Maximum Date Rate 10 MHz Package CERDIP Package (Sidebrazed) Cover Glass Clear or AR Coated, 2 Sides NOTE: Parameters above are specified at T = 25°C unless otherwise noted. www.onsemi.com Figure 1. KAF−6303 Full Frame CCD Image Sensor Features True Two ...