MCP2021A/2A
LIN Transceiver with Voltage Regulator
Features:
• The MCP2021A/2A are compliant with LIN Bus Specification...
MCP2021A/2A
LIN Transceiver with Voltage
Regulator
Features:
The MCP2021A/2A are compliant with LIN Bus Specifications Version 1.3, 2.1 and with SAE J2602-2
Support Baud Rates up to 20 kBaud
43V Load Dump Protected
Maximum Continuous Input Voltage: 30V
Wide LIN-Compliant Supply Voltage: 6.0 – 18.0V
Extended Temperature Range: -40 to +125°C Interface to PIC® MCU EUSART and Standard
USARTs
Wake-Up on LIN Bus Activity or Local Wake Input
Local Interconnect Network (LIN) Bus Pin:
- Internal Pull-Up Termination Resistor and Diode for Slave Node
- Protected Against VBAT Shorts
- Protected Against Loss of Ground
- High-Current Drive
TXD and LIN Bus Dominant Time-Out Function
Two Low-Power Modes:
- Transmitter Off: 90 µA (typical)
- Power Down: 4.5 µA (typical)
Output Indicating Internal Reset State (POR or Sleep Wake)
MCP2021A/2A On-Chip Voltage
Regulator:
- Output Voltage of 5.0V or 3.3V at 70 mA Capability with Tolerances of ±3% Over the Temperature Range
- Internal Short Circuit Current Limit
- External Components Limited to Filter Capacitor and Load Capacitor
Automatic Thermal Shutdown
High Electromagnetic Immunity (EMI), Low Electromagnetic Emission (EME)
Robust ESD Performance: ±15 kV for LBUS and VBB pin (IEC61000-4-2)
Transient Protection for LBUS and VBB Pins in Automotive Environment (ISO7637)
Meets Stringent Automotive Design Requirements, including “OEM Hardware Requirements for LIN, CAN and FlexRay Interfaces in Automotive Applicatio...