LIN J2602 Transceiver
MCP2003/4/3A/4A
LIN J2602 Transceiver
Features:
• The MCP2003/2003A and MCP2004/2004A are compliant with Local Intercon...
Description
MCP2003/4/3A/4A
LIN J2602 Transceiver
Features:
The MCP2003/2003A and MCP2004/2004A are compliant with Local Interconnect Network (LIN) Bus Specifications 1.3, 2.0 and 2.1 and are compliant to SAE J2602
Support Baud Rates up to 20 kbaudwith LIN-Compatible Output Driver
43V Load Dump Protected
Very Low High Electromagnetic Immunity (EMI) meets Stringent Original Equipment Manufacturers (OEM) Requirements
Very High Electrostatic Discharge (ESD) Immunity:
- >20 kV on VBB (IEC 61000-4-2)
- >14 kV on LBUS (IEC 61000-4-2)
Very High Immunity to RF Disturbances meets Stringent OEM Requirements
Wide Supply Voltage, 6.0V-27.0V Continuous
Extended Temperature Range: -40 to +125°C Interface to PIC® MCU EUSART and Standard
USARTs
LIN Bus Pin:
- Internal pull-up resistor and diode
- Protected against battery shorts
- Protected against loss of ground
- High current drive
Automatic Thermal Shutdown
Low-Power mode:
- Receiver monitoring bus and transmitter off,
( 5 µA)
Description:
This device provides a bidirectional, half-duplex communication, physical interface to automotive and industrial LIN systems to meet the LIN Bus Specification Revision 2.1 and SAE J2602. The device is short-circuit and over-temperature protected by internal circuitry. The device has been specifically designed to operate in the automotive operating environment and will survive all specified transient conditions while meeting all of the stringent quiescent current requirements.
MCP200X fam...
Similar Datasheet