Ultra Low Profile Common Choke
Document 1304-1
Ultra Low Profile Common Mode Choke 0805
• For noise suppression in super high speed signal lines: USB...
Description
Document 1304-1
Ultra Low Profile Common Mode Choke 0805
For noise suppression in super high speed signal lines: USB 3.x, HDMI 2.0, HDBaseT™, DisplayPort, DVI, etc.; and in high speed differential signal lines: USB 2.0, IEEE1394, LVDS, etc.
Up to 6.5 GHz differential mode 3 dB cutoff frequency; up to 35 dB common mode noise attenuation in GHz range
Lowest profile 0805 common mode choke – 0.93 mm tall Core material Ferrite Environmental RoHS compliant Terminations Matte tin over nickel over silver-platinum-glass frit. Weight 9.0 – 13.0 mg Ambient temperature –40°C to +125°C with Irms current. Maximum part temperature 140°C Storage temperature Component: –40°C to +155°C. Tape and reel packaging: –40°C to +80°C Resistance to soldering heat Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C / 85% relative humidity) Failures in Time (FIT) / Mean Time Between Failures (MTBF) 38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332 Packaging 2000/7″ reel; 7500/13″ reel; Plastic tape: 8 mm wide, 0.23 mm thick, 4 mm pocket spacing, 1.07 mm pocket depth PCB washing Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. See Doc787_PCB_Washing.pdf.
Part number1
Common mode impedance typ (Ohms) 10 MHz 100 MHz 500 MHz
Common mode DCR attenuation typ (dB) Inductance2 max3 Isolation4 Irms5 10 MHz 100 MHz 500 MHz m...
Similar Datasheet