0805USBF-672MRC

Document 1270-1 Low Profile USB Common Mode Choke 0805 For noise suppression in super high speed signal lines: USB 3.x, HDMI 2.0, HDBaseT™, DisplayPort, DVI, etc.; and in high speed differential signal lines: USB 2.0, IEEE1394, LVDS, etc. Suitable for USB-type C specification 1.0 Up to 6 GHz differential mode 3 dB cutoff frequency; up to 30 dB common mode noise attenuation in GHz range Core material Ferrite Environmental  RoHS compliant Terminations  Matte tin over nickel over silver-platinum-glass frit. Weight  14.7 – 15.5 mg Ambient temperature  –40°C to +125°C with Irms current. ­Maximum part temperature 140°C Storage temperature  Component: –40°C to +140°C. Tape and reel packaging: –40°C to +80°C Resistance to soldering heat  Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles Moisture Sensitivity Level (MSL)  1 (unlimited floor life at <30°C / 85% relative humidity) Failures in Time (FIT) / Mean Time Between Failures (MTBF) 38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332 Packaging  2000/7″ reel; 7500/13″ reel;  Plastic tape:  8 mm wide, 0.23 mm thick, 4 mm pocket spacing, 1.295 mm pocket depth PCB washing  Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. See Doc787_PCB_Washing.pdf. Part number1 Common mode impedance typ (Ohms) 10 MHz 100 MHz 500 MHz Common mode attenuation typ (dB)   Inductance2   DCR max3 Isolation  Irms4 10 MHz 100 MHz 500 MHz min (nH) (Ohms) (...