DO2010-223MLB

Document 413-1 SMT Power Inductors – DO2010 Smallest power inductor, only 2 mm square and 1 mm high Can handle up to 0.51 A of saturating current Designer’s Kit C399 contains 5 of each part Core material Ferrite Core and winding loss  See www.coilcraft.com/coreloss Terminations  RoHS compliant matte tin over nickel over silverplatinum-glass frit. Other terminations available at additional cost. Weight  11 mg Ambient temperature  –40°C to +85°C with Irms current, +85°C to +125°C with derated current Storage temperature  Component: –40°C to +125°C. Tape and reel packaging: –40°C to +80°C Resistance to soldering heat  Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles Moisture Sensitivity Level (MSL)  1 (unlimited floor life at <30°C / 85% relative humidity) Failures in Time (FIT) / Mean Time Between Failures (MTBF) 38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332 Packaging  1000/7″ reel; 3500/13″ reel  Plastic tape:  12 mm wide, 0.23 mm thick, 4 mm pocket spacing, 1.19 mm pocket depth PCB washing  Tested with pure water or alcohol only. For other solvents, see Doc787_PCB_Washing.pdf. Inductance DCR SRF   ±20%2   max3   typ4   Isat5   Irms6   Part number1 (µH) (Ohms) (MHz) (A) (A) DO2010-123ML_ 12 DO2010-153ML_ 15 DO2010-223ML_ 22 DO2010-333ML_ 33 DO2010-473ML_ 47 1.84 35 0.51 0.39 2.14 30 0.47 0.36 2.80 25 0.42 0.32 4.10 20 0.34 0.25 6.00 16 0.28 0.21 DO2010-683ML_ 6...