Document
UF5400-E thru UF5408-E
ULTRAFAST EFFICIENT
GLASS PASSIVATED RECTIFIER
Voltage: 50 to 1000V
Current: 3.0A
FEATURE
Low power loss High surge capability Ultra-fast recovery time for high efficiency High temperature soldering guaranteed 250℃/10sec/0.375″lead length at 5 lbs tension Halogen Free
DO-201AD
MECHANICAL DATA
Terminal:Plated axial leads solderable per MIL-STD 202E, method 208C
Case:Molded with UL-94 Class V-0 recognized Halogen Free Epoxy
Polarity:color band denotes cathode Mounting position:any
Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (single-phase, half-wave, 60HZ, resistive or inductive load rating at 25°C, unless otherwise stated,
for capacitive load, derate current by 20%)
Maximum Recurrent Peak Reverse Voltage
Maximum RMS Voltage
Maximum DC blocking Voltage
Maximum Average Forward Rectified Current 3/8" lead length at Ta =55°C Peak Forward Surge Current 8.3ms single Half sine-wave superimposed on rated load Maximum Instantaneous Forward Voltage at Rated forward current Maximum DC Reverse Current Ta =25°C At rated DC blocking voltage Ta =125°C
Maximum Reverse Recovery Time (Note 1)
Symbol
Vrrm Vrms Vdc If(av) Ifsm
Vf
Ir
Trr
UF5 400-
E
50
UF5 401-
E
100
UF5 402-
E
200
UF5 403-
E
300
UF5 404-
E
400
UF5 405-
E
500
UF5 406-
E
600
UF5 407-
E
800
UF5 408-
E
1000
units V
35 70 140 210 280 350 420 560 700 V
50 100 200 300 400 500 600 800 1000 V
3.0 A
150.0
A
1.0
10.0 100.0 50
1.7 75
V µA nS
Typical Junction Capacitance
(Note 2)
Cj
45.0
36.0
Typical Thermal Resistance
(Note 3)
Rth(ja) Rth(jl)
20.0 8.5
Storage and Operating Junction Temperature Tstg, Tj
-55 to +150
Note:
1. Reverse Recovery Condition If =0.5A, Ir =1.0A, Irr =0.25A 2. Measured at 1.0 MHz and applied reverse voltage of 4.0Vdc 3. Thermal Resistance from Junction to Ambient and Junction to Lead with 3/8″lead length, both leads attached to heatsink
pF ℃/W
°C
Rev.A1
www.gulfsemi.com
RATINGS AND CHARACTERISTIC CURVES UF5400-E THRU UF5408-E
Rev.A1
www.gulfsemi.com
.