Document
Plastic Film Capacitors
Metallized Polyester Film Capacitor
Type: ECQUG[Class X1]
In accordance with UL/CSA and European safety regulation class X1
Features
•Equipped with a safety mechanism •Flame-retardant plastic case and non combustible resin •RoHS directive compliant
Recommended Applications
•Interference suppressors
Explanation of Part Numbers
1 2 3 4 5 6 7 8 9 10 11
ECQU 3 A
MG
Product code
Dielectric & construction
Rated vol.
Capacitance
Cap. Tol. Suffix
M ±20 %
Applicable Standard
UL UL 1414
CSA
CSA C22.2 No.1
Across-The-Line Capacitors Antenna-Coupling and Line-By-Pass Components
Across-the-line capacitors Antenna-Isolation and line-by-pass capacitors
SEMKO
DEMKO
NEMKO IEC 60384-14 FIMKO EN 132400
Class X1
VDE
SEV
❈When applying this capacitor to European and American safety standards, please use type designation and rating such as ECQUG, 0.1 µF.
❈Approval number (File No.) of safety regulations are subject to revision without notice. Ask factory for a copy of the latest file No..
❈European standards marking are VDE and FIMKO only. But, there are no problem using this capacitor in a device which will get approvals from certification bodies in Europe, SEMKO, DEMKO, NEMKO and SEV etc. except VDE and FIMKO.
Specifications
Category temp. range Rated voltage Capacitance range Capacitance tolerance Dissipation factor (tan )
Withstand voltage
-40 ˚C to +100 ˚C (85 ˚C max. on UL/CSA spec.) 300 VAC (IEC60384-14), 250 VAC (UL, CSA) 0.010 µF to 1.0 µF (E6) ±20 % (M) tan <=1.0 % (20 ˚C, 1 kHz) Between terminals : 575 VAC, 1768 VDC, 60 s Between terminals to enclosure : 2100 VAC, 60 s
Insulation resistance (IR)
C<=0.33 µF : IR=>15000 MΩ (20 ˚C, 100 VDC, 60 s) C>0.33 µF : IR=>5000 MΩ · µF (20 ˚C, 100 VDC, 60 s) IR=>2000 MΩ (20 ˚C, 500 VDC, 60 s)
❈ Use of this capacitor is limited to AC voltage (50 Hz or 60 Hz sine wave).
Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. Whenever a doubt about safety arises from this product, please inform us immediately for technical consultation without fail.
IDimensions in mm (not to scale)
L 1.0
T 0.5
H 0.5
20min.
F 0.4
Q
+1.4 - 0.6
d 0.05
Plastic Film Capacitors
STYLE
1 (0.010 µF to
0.22 µF)
2 (0.33 µF to
1.0 µF)
a side .01 µF
1.0 µF 300 V
b side
ECQUG 300 V X1 250 V 40/100/21
250 V X1
ECQUG
40/100/21
DVE
GMF MKT
132400
c side
DVE
GMF MKT
132400
IRating & Dimensions G Capacitance tolerance : ±20 %(M)
Part No.
ECQU3A103MG ECQU3A153MG ECQU3A223MG ECQU3A333MG ECQU3A473MG ECQU3A683MG ECQU3A104MG ECQU3A154MG ECQU3A224MG ECQU3A334MG ECQU3A474MG ECQU3A684MG ECQU3A105MG
L
Cap. (µF)
0.010 0.015 0.022 0.033 0.047 0.068 0.10 0.15 0.22 0.33 0.47 0.68 1.0
L 15.0 15.0 15.0 15.0 15.0 15.0 15.0 18.0 18.0 26.0 26.0 26.0 27.0
Cap.tol.code
T 5.0 5.0 5.0 6.0 6.0 8.0 8.0 8.0 9.0 9.0 10.5 12.5 16.5
Dimensions (mm) H F ød 11.5 12.5 0.60 11.5 12.5 0.60 11.5 12.5 0.60 13.0 12.5 0.60 13.0 12.5 0.60 15.0 12.5 0.60 15.0 12.5 0.60 16.5 15.0 0.80 17.5 15.0 0.80 18.5 22.5 0.80 20.0 22.5 0.80 22.0 22.5 0.80 25.5 22.5 0.80
P 0±0.5 0±0.5 0±0.5 0±0.5 0±0.5 0±0.5 0±0.5 0±0.5 0±0.5 0±0.5 0±0.75 0±0.75 0±0.75
Q 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.5 1.5 1.5 2.2
Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. Whenever a doubt about safety arises from this product, please inform us immediately for technical consultation without fail.
.