Hall Effect Switch
Omnipolar Detection Hall IC
STH8103
■DESCRIPTION
Micro Power, Ultra-Sensitive, Hall Effect Switch
■FEATURE
STH8103 i...
Description
Omnipolar Detection Hall IC
STH8103
■DESCRIPTION
Micro Power, Ultra-Sensitive, Hall Effect Switch
■FEATURE
STH8103 is a three-terminal Hall Effect sensor device with a output driver, mainly designed for battery–operation, hand-held equipment (such as Cellular and Cordless Phone, PDA). For STH8103, either north or South Pole of sufficient strength will turn the output on. The output will be turned off under no magnetic field. While the magnetic flux density (B) is larger than operate point (Bop), the output will be turned on (low), the output is latched
until B is lower than release point (Brp), then turned off.
2.4V to 5.5V battery operation Micro Power Operation for Battery
Applications Chopper Stabilized Technology Operation with North or South Pole High sensitivity and high stability of the
magnetic switching points This is a RoHS compliance TSOT-23 package design
■APPLICATIONS
Note book PDA Mobile Phone Digital Camera Electric Equipment
■PIN CONFIGURATION
VDD VOUT
GND
TOP VIEW TSOT-23L
■PART NUMBER INFORMATION
STH8103XX- XX X
Lead Plating Code Handling Code Package Code
Lead Plating Code G : Lead-free product. This product is RoHS compliant
Handling Code TR : Tape&Reel
Package Code SS : TSOT-23L
STH8103 Rev.1.0 Copyright © Semtron Microtech Corp.
1
www.semtron-micro.com
■BLOCK DIAGRAM
VDD
STH8103
VOUT
■ORDERING INFORMATION
Part Number
Package Code
STH8103SS-TRG
SS
※ Year Code : 0 ~ 9 ※ Week Code : A ~ Z(1~26) ; a ~ z(27~52)...
Similar Datasheet