Document
Filters for Communication Equipment
for IF
BGS Filters
4-1.50±0.15
1.15 max. 3.0±0.2
Dot Marking (ø0.5)
3.0±0.2
M∗
(0.20)
(0.10)
(3) (2) (1) 0.75±0.20 1.50±0.20
Part Number MKFCC40M0CC0P00R05
0.4±0.1 6-0.60±0.15
Marking : Laser Printing ∗ : EIAJ Code
(4)
Pin (5) (3) : Input
(6) : Output (6) Others : Ground
5-0.75±0.20
0.75±0.10
(in mm)
Nominal Center Frequency(fn) (MHz)
40.00
3dB Bandwidth (MHz)
fn±1.75 min.
for IF
Chip LC Filters (Balance-balance Type)
0.40±0.15 0.40±0.15
2.5±0.2
Filters for Communication Equipment
0.8±0.1
Directional
3.2±0.2
1.5±0.1
7 Input Mark (1) (2) (3)
(10) (4)
(9) (5)
0.3±0.2
(8) (7) (6) 0.3±0.2
0.40±0.15 0.4±0.2
0.60±0.15 1.0±0.1
(1)(3)
: Balance IN
(2)(7)
: NC1
(4)(5)(9)(10) : NC2
(6)(8)
: Balance OUT
LFB32_SH Series
(in mm)
∗Terminal of "NC1" should be fixed to the no connected pattern. Terminal of "NC2" should not be fixed to any pattern.
All the technical data and Information contained herein are subject to change without prior notice.
Part Number
LFB32130MSH3A569 LFB32166MSH2A570
Nominal Center Frequency (fo)
(MHz)
130.38
166.85
Bandwidth (BW) (MHz)
fo±0.7 fo±0.65
Insertion Loss in BW (dB)
5 max. (at 25°C) 5 max. (at 25°C)
Input Balance Impedance (Differential) (Nom.) (ohm)
1000
300
Output Balance Impedance (Differential) (Nom.) (ohm)
250
300
!Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
07.06.20
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
This datasheet has been downloaded from http://www.digchip.com at this page
.