IS25WP020

IS25WP016 IS25WP080 IS25WP040 IS25WP020 16/8/4/2MBIT 1.8V SERIAL FLASH MEMORY WITH 133MHZ MULTI I/O SPI & QUAD I/O QPI DTR INTERFACE PRELIMINARY DATA SHEET 16/8/4/2MBIT 1.8V SERIAL FLASH MEMORY WITH 133MHZ MULTI I/O SPI & QUAD I/O QPI DTR INTERFACE IS25WP016/080/040/020 PRELIMINARY INFORMATION FEATURES  Industry Standard Serial Interface - IS25WP016: 16Mbit/2Mbyte - IS25WP080: 8Mbit/1Mbyte - IS25WP040: 4Mbit/512Kbyte - IS25WP020: 2Mbit/256Kbyte - 256 bytes per Programmable Page - Supports standard SPI, Fast, Dual, Dual I/O, Quad, Quad I/O, SPI DTR, Dual I/O DTR, Quad I/O DTR, and QPI - Supports Serial Flash Discoverable Parameters (SFDP)  High Performance Serial Flash (SPI) - 50MHz Normal and 133Mhz Fast Read - 532 MHz equivalent QPI - DTR (Dual Transfer Rate) up to 66MHz - Selectable Dummy Cycles - Configurable Drive Strength - Supports SPI Modes 0 and 3 - More than 100,000 Erase/Program cycles - More than 20-year Data Retention  Flexible & Efficient Memory Architecture - Chip Erase with Uniform: Sector/Block Erase (4/32/64 Kbyte) - Program 1 to 256 Bytes per Page - Program/Erase Suspend & Resume  Efficient Read and Program modes - Low Instruction Overhead Operations - Continuous Read 8/16/32/64-Byte Burst Wrap - Selectable Burst Length - QPI for Reduced Instruction Overhead - AutoBoot Operation  Low Power with Wide Temp. Ranges - Single 1.65V to 1.95V Voltage Supply - 10 mA Active Read Current (typ.) - 8 µA Standby Current (typ.) - 1 µA Deep Power Down(typ.) - Temp...