Document
INTEGRATED CIRCUITS DIVISION
Characteristics
Parameter
Blocking Voltage Load Current, TA=25°C:
With 5°C/W Heat Sink No Heat Sink On-Resistance (max) Thermal Resistance, Junction-to-case, JC
Rating 60
15 6.5 0.1
0.3
Units VP
Arms / ADC
°C/W
Features
• 15Arms Load Current with 5°C/W Heat Sink • Low 0.1 On-Resistance • 60VP Blocking Voltage • 2500Vrms Input/Output Isolation • Low Thermal Resistance: JC = 0.3 °C/W • Isolated, Low Thermal Impedance Ceramic Pad for
Heat Sink Applications • Low Drive Power Requirements • Arc-Free With No Snubbing Circuits • No EMI/RFI Generation • Machine Insertable, Wave Solderable
Applications
• Industrial Controls / Motor Control • Robotics • Medical Equipment—Patient/Equipment Isolation • Instrumentation
• Multiplexers • Data Acquisition • Electronic Switching • I/O Subsystems • Meters (Watt-Hour, Water, Gas) • Transportation Equipment • Aerospace/Defense
Approvals
• UL 508 Certified Component: File E69938
Pin Configuration
CPC1909
60V Single-Pole, Normally Open Power Relay
Description
IXYS Integrated Circuits Division and IXYS have combined to bring OptoMOS® technology, reliability and compact size to a new family of high-power Solid State Relays.
As part of this family, the CPC1909 single-pole normally open (1-Form-A) Solid State Power Relay is rated for up to 15Arms continuous load current with a 5°C/W heat sink.
The CPC1909 employs optically coupled MOSFET technology to provide 2500Vrms of input to output isolation. The optically coupled outputs, that use patented OptoMOS architecture, are controlled by a highly efficient infrared LED. The combination of low on-resistance and high load current handling capability makes this relay suitable for a variety of high performance switching applications.
The unique ISOPLUS-264 package pioneered by IXYS allows Solid State Relays to achieve the highest load current and power ratings. This package features a unique IXYS process where the silicon chips are soft soldered onto the Direct Copper Bond (DCB) substrate instead of the traditional copper leadframe. The DCB ceramic, the same substrate used in high power modules, not only provides 2500Vrms isolation but also very low junction-to-case thermal resistance (0.3 °C/W).
Ordering Information
Part CPC1909J
Description ISOPLUS-264 Package (25 per tube)
Switching Characteristics
Form-A
IF ILOAD
90% ton
10% toff
e3
DS-CPC1909-R08
www.ixysic.com
1
INTEGRATED CIRCUITS DIVISION
1 Specifications
1.1 Absolute Maximum Ratings @ 25°C
Symbol
Blocking Voltage Reverse Input Voltage Input Control Current Peak (10ms) Input Power Dissipation Isolation Voltage, Input to Output Operational Temperature Storage Temperature
Ratings
60 5 100 1 150 2500 -40 to +85 -40 to +125
Units
VP V mA A mW Vrms °C °C
CPC1909
Absolute maximum ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at conditions beyond those indicated in the oper.