Features
ÎÎ1:2 mux/demux for USB 3.0SS, 2.0HS, and 2.0FS signals ÎÎSwitches Tx, Rx, Dx, and USB_ID from USB3.0 connector...
Features
ÎÎ1:2 mux/demux for USB 3.0SS, 2.0HS, and 2.0FS signals ÎÎSwitches Tx, Rx, Dx, and USB_ID from USB3.0 connector ÎÎInsertion Loss for superspeed channels @ 2.5 GHz: -1.7dB ÎÎ-3dB Bandwidth for superspeed channels: 4.7GHz ÎÎReturn loss for superspeed channels @ 2.5GHz: -16dB ÎÎLow Bit-to-Bit Skew, 7ps max (between '+' and '-' bits) ÎÎLow Crosstalk for superspeed channels:
[email protected] Gbps ÎÎLow Off Isolation for superspeed channels:
[email protected] Gbps ÎÎVDD Operating Range: 3.3V +/-10% ÎÎESD Tolerance: 2kV HBM ÎÎLow channel-to-channel skew, 35ps max ÎÎPackaging (Pb-free & Green):
àà 32 TQFN (ZL)
PI3USB3102
USB3.0 and USB2.0 Combo Switch
Description
Pericom Semiconductor’s PI3USB3102 USB3.0 and USB2.0 Combo Switch is a complete 1:2 switching solution for SuperSpeed USB 3.0 signals. PI3USB3102 provides differential high-speed lanes for the USB3.0 4.8 Gbps TX and RX lanes as well as a differential lane for 480 Mbps USB 2.0 signals and the USB_ID signal.
PI3USB3102 can be used to connect two hosts to a single device or a single host to two devices.
PI3USB3102 offers excellent signal integrity for high-speed signals and low power dissipation. Insertion loss is 1.7 dB and return loss is -16 dB at 2.5 GHz. Power dissipation is 6.6 mW maximum.
Application
Routing of USB3.0 signals with low signal attenuation between source and sink.
Block Diagram
Tx+ Tx -
Rx+ Rx -
Tx+A
Tx -A
Rx+A Rx-A
D+
DUSB_ID
OE SS SEL HS SEL
Logic Control
Tx+B Tx-B Rx+B Rx-B
D+A D-A USB_ID A
D+B D- B US...