SINGLE-PHASE BRIDGE RECTIFIER
MOSPEC
SINGLE-PHASE BRIDGE RECTIFIER
VOLTAGE RANGE 50 to 1000 Volts
CURRENT
8.0 Ampere
FEATURES Low cost
High forwa...
Description
MOSPEC
SINGLE-PHASE BRIDGE RECTIFIER
VOLTAGE RANGE 50 to 1000 Volts
CURRENT
8.0 Ampere
FEATURES Low cost
High forward surge current capability
Ideal for printed circuit board
High temperature soldering guaranteed: 260oc/10 second,0.375”(9.5mm)lead length
at 5 lbs. (2.3kg) tension.
MECHANICAL DATA Case: Transfer molded plastic Epoxy: UL94V-O rate flame retardant
Terminals Lead Solderable Per MIL-STD-202 method 208C Polarity Polarity symbols marked on case Mounting :Thru hole for #6 screw, 5 in,-lbs.Torqute Max. Weight 0.27 ounce, 7.59 gram
RS801 THRU RS807
MAXIMUM RATINGS AND ELECTRICAL CHARATERISTICS
* Rating at 25 ambient temperature unless otherwise specified
* Single phase,half wave. 60Hz, resistive or inductive load. * For capacitive load derate current by 20 %
Characteristic
Symbol RS801 RS802 RS803 RS804 RS805 RS806 RS807
Unit
Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage
VRRM VRWM VDC
50
100 200 400 600 800 1000
V
RMS Reverse Voltage
VR(RMS)
Average Rectifier Forward TC=100
Current at
TA=45 (Note 3)
Non-Repetitive Peak Surge Current 8.3 ms Single half sine-wave superimposed on
rated load
Forward Voltage (per element) ( IF =8.0 Amp)
IO(AV) IFSM VFM
Peak Reverse Current at rated DC blocking voltage per element
I2 t Rating for Fusing( t<8.3ms)
TA = 25 TA = 100
Typical Junction Capacitance per element (Note1)
IR I2t CJ
Typical Thermal Resistance (per leg)(note 2) Operating and Storage Temperature Range
Rθ jc...
Similar Datasheet