79M05/79M12
®
79M05/79M12
Pb Free Plating Product
Pb
1 Ampere Surface Mount Negative Three Terminal Voltage Regulato...
79M05/79M12
®
79M05/79M12
Pb Free Plating Product
Pb
1 Ampere Surface Mount Negative Three Terminal Voltage
Regulators
Features
● Output Voltage: -5 & -12V ● Output current up to 1A ● No external components required ● Internal thermal overload protection ● Internal short-circuit current limiting ● Output
transistor safe-area compensation ● Output voltage offered in 4% tolerance
DPAK/TO-252
Standard Application Circuit
79M05/79M12
A common ground is required between the input and the output voltages. The input voltage must remain typically 2.0V above the output voltage even during the low point on the Input ripple voltage. XX = these two digits of the type number indicate
voltage.
* = Cin is required if
regulator is located an
appreciable distance from power supply filter. ** = Co is not needed for stability; however, it does improve transient response.
Absolute Maximum Rating (Ta = 25oC unless otherwise noted)
Parameter
Input Voltage Power Dissipation Junction Temperature Storage Temperature Range Thermal Resistance - Junction to Case
Thermal Resistance - Junction to Ambient
Note: * Follow the derating curve
TO-220 TO-252 TO-220 TO-252
Symbol
VIN PD TJ TSTG
RӨJC
RӨJA
Limit
-35 Internal Limited
+150 -65~+150
3 5 50 60
Unit
V W oC oC
oC/W
oC/W
Rev.05 © 2006 Thinki Semiconductor Co., Ltd.
Page 1/3 http://www.thinkisemi.com/
79M05/79M12
®
79M05 ElectricalCharacteristics
(Vin= -10V, Iout=500mA, 0oC≤Tj≤125oC, Cin=0.33uF, Cout=0.1uF; unless otherwise specified.)
...