DatasheetsPDF.com

SLC7530D-500ML Dataheets PDF



Part Number SLC7530D-500ML
Manufacturers Coilcraft
Logo Coilcraft
Description Shielded Power Inductors
Datasheet SLC7530D-500ML DatasheetSLC7530D-500ML Datasheet (PDF)

Document 366-1 Shielded Power Inductors – SLC7530 • Designed for high-speed switch mode applications • Can be used as a 1:1 transformer or in SEPIC applications Designer’s Kit C379 contains 3 each of all values. Core material Ferrite Core and winding loss See www.coilcraft.com/coreloss Terminations  RoHS compliant matte tin over nickel over copper. Other terminations available at additional cost. Weight:  0.44 – 0.47 g Ambient temperature  –40°C to +85°C with (40°C rise) Irms current. Maximum.

  SLC7530D-500ML   SLC7530D-500ML


Document
Document 366-1 Shielded Power Inductors – SLC7530 • Designed for high-speed switch mode applications • Can be used as a 1:1 transformer or in SEPIC applications Designer’s Kit C379 contains 3 each of all values. Core material Ferrite Core and winding loss See www.coilcraft.com/coreloss Terminations  RoHS compliant matte tin over nickel over copper. Other terminations available at additional cost. Weight:  0.44 – 0.47 g Ambient temperature  –40°C to +85°C with (40°C rise) Irms current. Maximum part temperature  +125°C (ambient + temp rise). Derating. Storage temperature  Component: –40°C to +125°C. Tape and reel packaging: –40°C to +80°C Resistance to soldering heat  Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles Moisture Sensitivity Level (MSL)  1 (unlimited floor life at <30°C / 85% relative humidity) Failures in Time (FIT) / Mean Time Between Failures (MTBF) 38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332 Packaging  500/7″ reel; 1700/13″ reel;  Plastic tape:  16 mm wide, 0.33 mm thick, 12 mm pocket spacing, 3.12 mm pocket depth PCB washing  Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. See Doc787_PCB_Washing.pdf. Single Conductor  L±20%2  DCR ±5%3   SRF typ4  Isat5  Irms6  Part number1 (µH) (mOhms) (GHz) (A) (A) SLC7530S-500ML_ 0.050 0.123 3.80 50 40 SLC7530S-640ML_ 0.064 0.123 3.65 32 40 SLC7530S-820ML_ 0.082 0.123 3.75 22 40 SLC7530S-101ML_ 0.100 0.123 3.75 20 40 Dual Conductor Leads connected in parallel  L±20%2  DCR ±5%3  SRF typ4  Isat5  Irms6  Part number1 (µH) (mOhms) (GHz) (A) (A) SLC7530D-500ML_ 0.050 0.209 3.75 50 38 SLC7530D-640ML_ 0.064 0.209 3.65 32 38 SLC7530D-820ML_ 0.082 0.209 3.75 22 38 SLC7530D-101ML_ 0.100 0.209 3.75 20 38 Leads connected in series  L±20%2  DCR max3  SRF typ4  Isat5  Irms6 (µH) (mOhms) (GHz) (A) (A) 0.188 1.00 0.272 1.00 0.350 1.00 0.400 1.00 1.50 21 17 1.30 14 17 1.20 11 17 0.950 8 17 1. When ordering, please specify termination and packaging codes: SLC7530S-101MLC Termination: L = RoHS compliant matte tin over nickel over copper Special order: T = RoHS tin-silver-copper (95.5/4/0.5) or S = non-RoHS tin-lead (63/37). Packaging: C = 7″ machine-ready reel. EIA-481 embossed plastic tape (500 parts per full reel). B = Less than full reel. In tape, but not machine ready. To have a leader and trailer added ($25 charge), use code letter C instead. D = 13″ machine-ready reel. EIA-481 embossed plastic tape. Factory order only, not stocked (1700 parts per full reel). 2. Inductance tested at 100 kHz, 0.1 Vrms using an Agilent/HP 4263B LCR meter or equivalent. 3. DCR is measured on a micro-ohmmeter at points indicated in the diagram. Points used for measuring DCR 4. SRF measured using an Agilent/HP 8753ES network analyzer and a Coilcraft SMD-D fixture. 5. DC current at 25°C that causes a 20% (typ) inductance drop from its value without current. Click for temperature derating information. 6. Current that causes a 40°C temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maximum ratings. Click for temperature derating information. 7. Electrical specifications at 25°C. Refer to Doc 362 “Soldering Surface Mount Components” before soldering. Document 366-1  Revised 09/15/15 Inductance (µH) Document 366-2 Shielded Power Inductors - SLC7530 Series Typical L vs Current Single Conductor 1 Dual Conductor 1 Measured with leads connected in series -101 -820 -640 Inductance (µH) -500 Measured with leads connected in parallel 0.1 -101 0.1 -101 -820 -640 -500 -820 -640 -500 0.01 0.1 1 10 Current (A) Typical L vs Frequency Single Conductor 1 0.1 -101 -820 -640 -500 0.01 100 0.1 1 10 Current (A) 100 Dual Conductor 1 Measured with leads connected in series Measured with leads connected in parallel 0.1 -101 -820 -640 -500 -101 -820 -640 -500 Inductance (µH) 0.01 0.01 0.1 1 Frequency (MHz) 0.01 10 0.01 0.1 1 Frequency (MHz) 10 Inductance (µH) Document 366-2  Revised 09/15/15 Document 366-3 Shielded Power Inductors - SLC7530 Series Dimensions – Single Conductor 0.295 7,50 max 0.264 6,70 max 1 XXXS X 2 Dash number Internal code 1 2 0.118 3,00 max 0.118 3,00 0.067 1,70 Dimensions are in inches mm 0.154 3,90 0.106 2,70 0.106 2,70 0.311 7,90 Recommended Land Pattern Typical Temperature Rise vs Current 80 70 60 50 40 30 ConSnLeCct7e5d3Si0nLDCp7a5ra3l0leSl 20 10 0 0 10 20 30 40 50 Current (A rms) 60 Dimensions – Dual Conductor 0.295 7,50 max 0.264 6,70 max 14 XXXD X 23 Dash number Internal code 0.118 3,00 max 0.039 1,00 0.047 1,20 0.050 1,27 0.067 1,70 0.079 2,00 0.020 1 0,50 0.020 4 0,50 0.185 4,70 0.311 7,90 23 0.177 4,50 Series mode 0.106 2,70 0.177 4,50 0.106 2,70 0.311 7,90 Parallel mode 14 Winding 1 Winding 2 23 Winding-to-winding isolation: 25 V maximum Dimensi.


SLC7530S-101ML SLC7530D-500ML SLC7530D-640ML


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)