EPL3314-153ML

Document 633-1 Shielded PowerInductors– EPL3314 Small footprint, very low profile shielded power inductor Extremely low DCR, Isat ratings as high as 2.3 A Core material Ferrite Core and winding loss See www.coilcraft.com/coreloss Environmental  RoHS compliant, halogen free Terminations  RoHS compliant tin-silver-copper (96.5/3/0.5) over tin over nickel over silver-platinum. Other terminations available at additional cost. Weight  53 – 60 mg Ambient temperature  –40°C to +85°C with (40°C rise) Irms current. Maximum part temperature  +125°C (ambient + temp rise). Derating. Storage temperature  Component: –40°C to +125°C. Tape and reel packaging: –40°C to +80°C Resistance to soldering heat  Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles Moisture Sensitivity Level (MSL)  1 (unlimited floor life at <30°C / 85% relative humidity) Mean Time Between Failures (MTBF)  26,315,789 hours Packaging  2000/7″ reel; 7500/13″ reel  Plastic tape:  12 mm wide, 0.20 mm thick, 8 mm pocket spacing, 1.55 mm pocket depth PCB washing  Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. See Doc787_PCB_Washing.pdf.   Part number1   Inductance2 ±20% (µH) EPL3314-102ML_ 1.0 EPL3314-222ML_ 2.2 EPL3314-332ML_ 3.3 EPL3314-472ML_ 4.7 EPL3314-822ML_ 8.2 EPL3314-103ML_ 10 EPL3314-153ML_ 15 EPL3314-473ML_ 47   DCR (Ohms)3 nom    max   SRF typ4   Isat (A)5 (MHz) 10% drop 20% drop 30% drop   Irms (A)6 20°C rise...