EZ-BLE PRoC Module
CYBLE-222014-01
EZ-BLE™ Creator Module
General Description
The Cypress CYBLE-222014-01 is a fully certified and qualifi...
Description
CYBLE-222014-01
EZ-BLE™ Creator Module
General Description
The Cypress CYBLE-222014-01 is a fully certified and qualified module supporting Bluetooth Low Energy (BLE) 4.2 wireless communication. The CYBLE-222014-01 is a turnkey solution and includes onboard crystal oscillators, chip antenna, passive components, and Cypress PSoC 4 BLE. Refer to the PSoC 4 BLE datasheet for additional details on the capabilities of the BLE device used on this module. The CYBLE-222014-01 supports a number of peripheral functions (ADC, timers, counters, PWM) and serial communication protocols (I2C, UART, SPI) through its programmable architecture. The CYBLE-222014-01 includes a royalty-free BLE stack compatible with Bluetooth 4.2 and provides up to 16 GPIOs in a small 10 × 10 × 1.80 mm package. The CYBLE-222014-01 is drop-in compatible with the CYBLE-022001-00 (128KB BT 4.1) and CYBLE-222005-00 (256KB BT 4.1).
Module Description ■ Module size: 10.0 mm ×10.0 mm × 1.80 mm (with shield) ■ 256-KB flash memory, 32-KB SRAM memory ■ Up to 16 GPIOs configurable as open drain high/low,
pull-up/pull-down, HI-Z analog, HI-Z digital, or strong output ■ Bluetooth 4.2 qualified single-mode module
❐ QDID: 82978 ❐ Declaration ID: D030801 ■ Certified to FCC, CE MIC, KC, and ISED regulations ■ Eight-channel direct memory access (DMA) controller ■ 32-bit processor (0.9 DMIPS/MHz) with single-cycle 32-bit multiply, operating at up to 48 MHz ■ Industrial temperature range: –40 °C to +85 °C ■ Watchdog timer with ded...
Similar Datasheet