Document
TP6KE Series
TVS Diodes
Axial Leaded – 600W > TP6KE series
RoHS
Pb e3
Bi-directional
Uni-directional
Agency Approvals
AGENCY
AGENCY FILE NUMBER E230531
Maximum Ratings and Thermal Characteristics (TA=25OC unless otherwise noted)
Parameter Peak Pulse Power Dissipation by 10/1000μs Test Waveform (Fig.2) (Note 1)
Steady State Power Dissipation on Infinite Heat Sink at TL=75ºC (Fig. 6) Peak Forward Surge Current, 8.3ms Single Half Sine Wave Unidirectional Only (Note 2) Maximum Instantaneous Forward Voltage at 50A for Unidirectional Only Operating Junction and Storage Temperature Range
Typical Thermal Resistance Junction to Lead
Typical Thermal Resistance Junction to Ambient
Symbol PPPM PD IFSM VF
TJ, TSTG RuJL RuJA
Value 600 5.0 100 3.5 -55 to 175 20 75
Unit W W A V °C °C/W °C/W
Notes: 1. Non-repetitive current pulse, per Fig. 4 and derated above TJ (initial) = 25OC per Fig. 3.
2. Measured on 8.3ms single half sine wave or equivalent square wave, duty cycle=4 per minute maximum.
Functional Diagram
Description
The AEC-Q101 qualified TP6KE Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events.
Features
• Hi reliability application and automotive grade AEC-Q101 qualified
• EFT protection of data lines in accordance with IEC 61000-4-4 (IEC801-4)
• Glass passivated chip
• Low incremental surge
junction in DO-15 Package resistance
• 600W peak pulse capability at 10/1000μs waveform, repetition rate (duty cycles):0.01%
• Fast response time: typically less than 1.0ps from 0 Volts to BV min
• Excellent clamping capability
• Typical failure mode is short from over-specified voltage or current
• Whisker test is conducted based on JEDEC JESD201A per its table 4a and 4c
• IEC-61000-4-2 ESD 30kV(Air), 30kV (Contact)
• ESD protection of data lines in accordance with IEC 61000-4-2 (IEC801-2)
• High temperature to reflow soldering guaranteed: 260°C/40sec / 0.375”,(9.5mm) lead length, 5 lbs., (2.3kg) tension
• VBR @ TJ= VBR@25°C x (1+αT x (TJ - 25)) (αT:Temperature Coefficient, typical value is 0.1%)
• Plastic package has underwriters laboratory flammability classification 94V-O
• Lead-free matte tin plated package
• Halogen free and RoHS compliant
Applications
TVS devices are ideal for the protection of I/O interfaces, cVoCCmbpuustearn, dinodtuhsetrriavlualnnedracbolnescuimrcueirtseluescetrdoninictealpepcloicmat,ions.
Cathode TP6KE Series
Bi-directional Uni-directional
Anode
8816
©2015 Littelfuse, Inc. Specifications are subject to change without notice.
Revised: 04/08/15
TVS Diodes
Axial Leaded – 600W > TP6KE series
Electrical Characteristics (TA=25°C unless otherwise noted)
Part Number
(Uni)
Part Number
(Bi)
Reverse Stand off Vo(lVtaogltes)VR
Breakdown Voltage VBR (Volts) @ IT MIN MAX
TP6KE13A TP6KE15A TP6KE16A TP6KE18A TP6KE20A TP6KE22A TP6KE24A TP6KE27A TP6KE30A TP6KE33A TP6KE36A TP6KE39A TP6KE43A TP6KE47A TP6KE51A TP6K.