EPL3010

Document 615-1 Shielded Power Inductors – EPL3010 Low profile shielded power inductors, 3 × 3 × 1 mm Extremely low DCR,high SRF ratings, Isat ratings up to 2.2 A Designer’s Kit C431 contains 5 each of all values Core material Ferrite Core and winding loss See www.coilcraft.com/coreloss Environmental  RoHS compliant, halogen free Terminations  RoHS compliant tin-silver-copper (96.5/3/0.5) over tin over nickel over silver-platinum. Other terminations available at additional cost. Weight  32 – 38 mg Ambient temperature  –40°C to +85°C with (40°C rise) Irms current. Maximum part temperature  +125°C (ambient + temp rise). Derating. Storage temperature  Component: –40°C to +125°C. Tape and reel packaging: –40°C to +80°C Resistance to soldering heat  Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles Moisture Sensitivity Level (MSL)  1 (unlimited floor life at <30°C / 85% relative humidity) Failures in Time (FIT) / Mean Time Between Failures (MTBF) 38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332 Packaging  2000/7″ reel; 7500/13″ reel;  Plastic tape:  8 mm wide, 0.20 mm thick, 4 mm pocket spacing, 1.14 mm pocket depth PCB washing  Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. See Doc787_PCB_Washing.pdf.   Part number1   Inductance2   DCR nom3   DCR max3   SRF typ4   Isat (A)5 ±20% (µH) (Ohms) (Ohms) (MHz) 10% drop 20% drop 30% drop   Irms (A)6 20°C rise  40°C rise EPL...