100-800 Vdc Contactor
400+ Amp 100-800 Vdc Contactor
G V240
FEATURES
PCB mountable option allows lowest cost OEM solution by eliminating ne...
Description
400+ Amp 100-800 Vdc Contactor
G V240
FEATURES
PCB mountable option allows lowest cost OEM solution by eliminating need for cables, wires and connector.
Hermetically Sealed – Designed to meet: UL1604 for Class I & II, Div 2 and Class III for use in hazardous locations, IP67 for temporary water immersion for 30 min, SAE J1171 - external ignition protection, and ISO8846 for protection against ignition around flammable gasses.
Meets CE Conformance standards.
High Efficiency Dual DC Coils – Very low 12, 24, or 48VDC continuous coil power with no EMI emissions or cross-talk on your system control power. Ideal for battery powered systems or where low power is needed. PWM coil options provide additional drive control flexibility.
Built-in coil suppression for all DC coils – Saves you engineering time and parts cost to add external coil suppression.
Not position sensitive – can be mounted in any position for ease of installation.
ADVANCED SWITCHING SOLUTIONS
Rev 1 1/28/16
400+ Amp 100-800 Vdc
DC Contactor G V240
PRODUCT SPECIFICATIONS
POWER SWITCHING
Specifications
Units
Rated Voltage 12/
V
Contact Arrangement (main)
Form X
Contact Arrangement (Auxilary) 1/
Form A
Form C
Mechanical Life
cycles
Contact Resistance
Max @ rated carry current Typical @ rated carry current
mohms mohms
Operate time, 25˚C
Close (includes bounce) Max
ms
Close (includes bounce) Typical
ms
Bounce on close, Max
ms
Release time
ms
(includes arc time at max. break ...
Similar Datasheet