8-Bit Parallel-In/Serial-Out Shift Registers
DM74LS166 8-Bit Parallel-In Serial-Out Shift Registers
May 1989
DM74LS166 8-Bit Parallel-In Serial-Out Shift Registers...
Description
DM74LS166 8-Bit Parallel-In Serial-Out Shift Registers
May 1989
DM74LS166 8-Bit Parallel-In Serial-Out Shift Registers
General Description
These parallel-in or serial-in serial-out shift registers feature gated clock inputs and an overriding clear input All inputs are buffered to lower the drive requirements to one normalized load and input clamping diodes minimize switching transients to simplify system design The load mode is established by the shift load input When high this input enables the serial data input and couples the eight flip-flops for serial shifting with each clock pulse When low the parallel (broadside) data inputs are enabled and synchronous loading occurs on the next clock pulse During parallel loading serial data flow is inhibited Clocking is accomplished on
the low-to-high-level edge of the clock pulse through a twoinput NOR gate permitting one input to be used as a clockenable or clock-inhibit function Holding either of the clock inputs high inhibits clocking holding either low enables the other clock input This allows the system clock to be free running and the register can be stopped on command with the other clock input The clock-inhibit input should be changed to the high level only while the clock input is high A buffered direct clear input overrides all other inputs including the clock and sets all flip-flops to zero
Connection Diagram
Dual-In-Line Package
Order Number DM74LS166WM or DM74LS166N See NS Package Number M16B or N16A
TL F 6400 –...
Similar Datasheet