Maximum Power 49W BTL x 4-ch Audio Power IC
Bi-CMOS Linear Integrated Circuit Silicon Monolithic
TB2938HQ
TB2938HQ
Maximum Power 49W BTL 4-ch Audio Power IC
1....
Description
Bi-CMOS Linear Integrated Circuit Silicon Monolithic
TB2938HQ
TB2938HQ
Maximum Power 49W BTL 4-ch Audio Power IC
1. Description
The TB2938HQ is a four-channel BTL power amplifier for car audio applications. This IC has a pure complementary P-ch and N-ch DMOS output stage, offering maximum output power (POUT MAX) of 49W. It includes a standby switch, mute function and various protection features.
2. Applications
Power IC developed for car audio applications.
Weight: 7.7 g (typ.)
3. Features
High output power, low distortion, and low noise property (for details, refer to the Table 3-1) Built-in various detection function (Output DC offset detection, Output short, Output layer short) (pin25) Built-in various mute functions (low voltage, standby on/off) (pin22) Built-in standby switch (pin4) Built-in mute switch (pin22) Start stop Cruising corresponded (at Vcc=6V) Built-in various protection circuits (thermal shut down, over-voltage, short to GND, short to VCC, and output to
output short, speaker current limiting)
Table 3-1 Typical Characteristics
(Note1,Note2)
Condition
Typ. Unit
Output power (POUT)
VCC = 15.2 V, JEITA max
49
VCC = 14.4 V, JEITA max
44
VCC = 14.4 V, THD = 10%
29
THD = 10%
24
W
Total harmonic distortion (THD)
POUT = 5 W
0.01 %
Output noise voltage (VNO) (Rg = 0 Ω),
BW = 20 Hz to 20 kHz
50 µV
Operating Supply voltage range (VCC)
RL = 4 Ω
6 to 18 V
Note1: Typical test conditions: VCC = 13.2 V, f = 1 kHz, RL = 4 Ω, GV = 26 ...
Similar Datasheet