FT1611BH

TO220-AB FT16...H HIGH COMMUTATION TRIAC MT2 On-State Current 16 Amp Gate Trigger Current ≤ 25 mA to ≤ 50 mA Off-State Voltage 200 V ÷ 600 V MT1 MT2 G This series of TRIACs uses a high performance PNPN technology. These parts are intended for general purpose AC switching applications with highly inductive loads. Absolute Maximum Ratings, according to IEC publication No. 134 SYMBOL IT(RMS) ITSM ITSM I2t IGM PG(AV) di/dt Tj Tstg PARAMETER CONDITIONS RMS On-state Current Non-repetitive On-State Current Non-repetitive On-State Current Fusing Current Peak Gate Current Average Gate Power Dissipation Critical rate of rise of on-state current Operating Temperature Storage Temperature All Conduction Angle, TC = 100 ºC Full Cycle, 60 Hz Full Cycle, 50 Hz t = 10 ms, Half Cycle 20 µs max. Tj =125ºC Tj =125ºC IG = 2x IGT, tr ≤100ns f= 120 Hz, Tj =125ºC Min. Max. Unit 16 A 170 A 160 A 150 A2s 4A 1W 50 A/µs -40 +125 -40 +150 ºC ºC SYMBOL VDRM VRRM PARAMETER Repetitive Peak Off State Voltage VOLTAGE BD 200 400 M 600 Unit V Jun - 03 FT16...H HIGH COMMUTATION TRIAC Electrical Characteristics SYMBOL PARAMETER CONDITIONS Quadrant SENSITIVITY Unit IGT (1) Gate Trigger Current IDRM /IRRM Off-State Leakage Current Vto (2) Rd(2) VTM (2) VGT VGD IH (2) IL Threshold Voltage Dynamic Resistance On-state Voltage Gate Trigger Voltage Gate Non Trigger Voltage Holding Current Latching Current VD = 12 VDC , RL = 30Ω, Tj = 25 ºC VD = VDRM , RGK = 1KΩ, Tj = 125 ºC VR = VRR...